The MG resilient mounts are for commercial, industrial, machine, and marine applications where the lightness of the equipment is very important. For this reason, they are manufactured in a light alloy in their standard version. The damping element of the MG series resilient mounts is made of natural rubber (NR). The material properties of natural rubber (NR) allow the bearings to be used at ambient temperatures from -20 °C to +70 °C. Available in the load range of 100 N to 6400 N. Due to their low natural frequency, these resilient mounts can be used for supporting all kinds of machinery and equipment where a significant reduction of noise and vibration is required.
MG mounts are divided into two different categories:
DNP (directly non-protected).
DP (direct protected) with aluminum metal casting
Different metal castings are available on demand.
The specific shape of the rubber ensures the constancy of the load-strain ratio, even over 30% of the nominal load. The transversal stiffness, which is about one-half that of the vertical ones, is also constant. Together with the high natural rubber quality, these characteristics equip the mounts with a high capacity to reduce vibrations in widespread applications. In case the mount potentially comes into contact with external corrosive agents, it can be supplied with a protective metallic casing (DP version). This version is also equipped with a rubber stop to prevent metal-to-metal contact. MG mounts are divided into two different categories:
DNP (directly non-protected).
DP (direct protected) with aluminum metal casting
Different metal castings are available on demand.

Benefits