• Monitoring of the mean twist angle up to a 60-degree twist.
• Monitoring of dynamic vibratory twist angle and torsional amplitudes, 
drive side and driven side, up to 30 degrees.
• Measuring and monitoring of the drive side and driven side 
 torsional vibrations.
• Measuring and monitoring transient operating conditions,
 like starting/stopping, maneuvering.
• Order-dependent frequency analysis of the measuring signal with 
 simultaneous monitoring of up to 8 engine orders.
• Graphical display on connected PC. 
• Alarm trigger for all monitoring thresholds with alarm indication
 over 2 x LED´s and 2 x relays suitable for up to 30 volts, current 
 up to 3 amps.
• Alarm thresholds up to four speed ranges.
• Automatic protocol of alarms and current values of the monitored 
parameters with an actual limit value on an internal storage medium.
• Limits can be set via an Ethernet-connected laptop, password protected.
• Data logging of events, stored for subsequent analysis using graphic
viewer or export.
• Power input from 18 to 34 V DC.
• ABS type approved.

Benefits

• MDS 2 twist angle monitor enables operators to plan maintenance 
work on the monitored drive train based on the measured condition
status, reducing downtime and cost.
• Sensors measuring against existing bolt heads.
• MDS 2 in combination with a clutch is approved by ABS to disengage
the drive train in case of overload, reaction time 80 ms.
• Worldwide VULKAN after-sales service by internet connection
via PC to MDS 2.